P1 study-body
Local cut vertices (u, v), mm: 1: (0, 0); 2: (12, 0); 3: (12, 250); 4: (0, 250).
Edges in vertex order, mm: 12, 250, 12, 250.
Assembly vertices (x, y, z), mm: 1: (-6, 0, 0); 2: (6, 0, 0); 3: (6, 250, 0); 4: (-6, 250, 0).
Learning Center
A conventional main wing and fuselage carry a horizontal tail across the top of a raised vertical fin.
YOUR PAPER AIRPLANE
Add a flat tail across the top of an upright fin to form a T-shaped tail.
Experimental 3D guide. FlightHub has not physically tested this pattern’s folding or flight.
The 3D view is not a cutting template. These drawings give nominal outlines and joining coordinates in millimeters; they resize to fit this screen. The coordinates are software-checked, but physical fit and a learner-tested join order are unverified.
For an offline copy and standalone SVG files, keep this design in Studio and download its guide. If printing cut sheets, use 100% size and measure the 50 mm scale bar before cutting. Print scale, paper fit, joint strength and flight remain physically unverified.
6 parts on 1 checked US Letter sheet. Each cut outline is a rigid unfolding of the same part shown in the assembly. Dimensions are nominal geometric targets; paper thickness, tape, joint fit and strength remain unverified. No calibrated slot width or flight setting is specified.
Use the separate SVG cut-sheet files at 100% size and measure their 50 mm bars. Part views and assembly views below may be enlarged; use their written dimensions and coordinates.
| Part | Role | Sheet | Cut bounds (mm) |
|---|---|---|---|
| P1 study-body | body | 1 | 12, 250 |
| P2 t-tail-main-left | main-wing | 1 | 81.627, 35.404 |
| P3 t-tail-main-right | main-wing | 1 | 81.627, 35.404 |
| P4 t-tail-plane-left | tail | 1 | 17.89, 37.768 |
| P5 t-tail-plane-right | tail | 1 | 17.89, 37.768 |
| P6 t-tail-fin | fin | 1 | 54, 30 |
For each part, mark vertex 1, then the remaining local (u, v) coordinates in millimeters and join them in numbered order. The edge lengths are a cross-check; the bounding rectangle alone is not the part shape.
Local cut vertices (u, v), mm: 1: (0, 0); 2: (12, 0); 3: (12, 250); 4: (0, 250).
Edges in vertex order, mm: 12, 250, 12, 250.
Assembly vertices (x, y, z), mm: 1: (-6, 0, 0); 2: (6, 0, 0); 3: (6, 250, 0); 4: (-6, 250, 0).
Local cut vertices (u, v), mm: 1: (0, 0); 2: (77.279, 0); 3: (81.627, 23.603); 4: (6.522, 35.404).
Edges in vertex order, mm: 77.279, 24, 76.026, 36.
Assembly vertices (x, y, z), mm: 1: (0, 92, 0); 2: (-76, 106, 0); 3: (-76, 130, 0); 4: (0, 128, 0).
Local cut vertices (u, v), mm: 1: (0, 0); 2: (77.279, 0); 3: (81.627, 23.603); 4: (6.522, 35.404).
Edges in vertex order, mm: 77.279, 24, 76.026, 36.
Assembly vertices (x, y, z), mm: 1: (0, 92, 0); 2: (76, 106, 0); 3: (76, 130, 0); 4: (0, 128, 0).
Local cut vertices (u, v), mm: 1: (17.89, 0); 2: (17.89, 36.222); 3: (3.976, 37.768); 4: (0, 1.988).
Edges in vertex order, mm: 36.222, 14, 36, 18.
Assembly vertices (x, y, z), mm: 1: (0, 222, 30); 2: (-36, 226, 30); 3: (-36, 240, 30); 4: (0, 240, 30).
Local cut vertices (u, v), mm: 1: (17.89, 0); 2: (17.89, 36.222); 3: (3.976, 37.768); 4: (0, 1.988).
Edges in vertex order, mm: 36.222, 14, 36, 18.
Assembly vertices (x, y, z), mm: 1: (0, 222, 30); 2: (36, 226, 30); 3: (36, 240, 30); 4: (0, 240, 30).
Local cut vertices (u, v), mm: 1: (0, 0); 2: (54, 0); 3: (44, 30); 4: (26, 30).
Edges in vertex order, mm: 54, 31.623, 18, 39.699.
Assembly vertices (x, y, z), mm: 1: (0, 196, 0); 2: (0, 250, 0); 3: (0, 240, 30); 4: (0, 222, 30).
Assembly coordinates in millimeters: x left/right, y rearward from the body nose (or the shown center datum), z up. Cut drawings use their own numbered vertex coordinates. Match the listed edge or overlap endpoints. Tape tabs join those locations; the layout does not prescribe an adhesive product, tape size or verified load capacity.
| Join | Parts | Method | Endpoint A (x, y, z), mm | Endpoint B (x, y, z), mm |
|---|---|---|---|---|
| J1 | P1 study-body / P2 t-tail-main-left | tape-overlap | 0, 92, 0 | -6, 128.158, 0 |
| J2 | P1 study-body / P3 t-tail-main-right | tape-overlap | 0, 92, 0 | 6, 128.158, 0 |
| J3 | P1 study-body / P6 t-tail-fin | tape-edge | 0, 196, 0 | 0, 250, 0 |
| J4 | P2 t-tail-main-left / P3 t-tail-main-right | tape-edge | 0, 92, 0 | 0, 128, 0 |
| J5 | P4 t-tail-plane-left / P5 t-tail-plane-right | tape-edge | 0, 222, 30 | 0, 240, 30 |
| J6 | P4 t-tail-plane-left / P6 t-tail-fin | tape-edge | 0, 222, 30 | 0, 240, 30 |
| J7 | P5 t-tail-plane-right / P6 t-tail-fin | tape-edge | 0, 222, 30 | 0, 240, 30 |
Use 1 uncoated US Letter sheet, 215.9 × 279.4 mm, at your selected 75 g/m² weight.
Paper source: HP Office20 · US Letter · 75 g/m² · 500 sheets at Staples. Confirm delivery and availability for your address before buying.
Check the package for the sheet size and weight. For this recipe: ruler + pencil · scissors · tape for assembly.
Tape is used for the documented joins. Joint fit and strength remain unverified; inspect the assembled parts before any trial.