3D printed RC aircraft
FlightHub Design Concepts
Explore FlightHub’s electric RC aircraft. Open a design to see its 3D assembly, print setup, and build guide.
RC builds

Revision 0.2.1
Raven-Scout RC
A three-channel electric trainer with a streamlined power pod, fitted wing roots and enclosed tail servos.
View build details
Revision R2-S2
Raven Plank R2-S2
A 650 mm rear-pusher flying wing for bench review, with a keyed pod splice, adjustable battery restraint and revised elevon servo mounts.
View build details
Revision R1-A4
Raven Trainer R1-A4
A compact 440 mm electric trainer with a high wing, a carbon tail boom and two micro servos.
View build details
Revision 0.2.0
Raven Kestrel
Raven Kestrel 0.2.0 is the 4+1 high-wing bench prototype with removable port and starboard wing-to-pod fairings. The fairing-off and fairing-on configurations share the successor anchor shoes. The original 0.1.0 build is a separate control. Verify retention, propeller clearance and loads before powered testing.
View build details
Revision 0.2.1
Raven Switchwing
A front-tilt tricopter with a removable aft keel and a revised center battery bay. The forward hatch gives access to a shorter XT60 candidate pack while the aft deck stays seated.
View build details
Revision 0.2.0
Raven Perch
Raven Perch 0.2.0 is the twin-tractor flying-wing tail-sitter with a removable nose and four-point landing cradle. Module-local rail stocks preserve the nose and cradle release paths. The hatch opens before access to either hook and cam. Check retention and loads on the exact physical bench article.
View build details